ASK AN EXPERTDescription
- Picatinny rail allows custom scope positioning
- Accepts Picatinny scope rings, Weaver scope rings
- Matte Black Finish
There will be longer screws provided with the mount that should work with minimal modification.
This base fits the Remington 4, 6, 7400, 750, 7600, 7615, Benelli Auto/Super Black Eagle/Vinchi/M190, Weaver 93, Stoeger M3000.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.
The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.
EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
Add EGW's Practical or HD Scope Rings to make it a complete overhaul!
EGW machines these in their shop using one of the USA-made Fadal machining centers.
After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Installation:
EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
This base fits the Remington 4, 6, 7400, 750, 7600, 7615, Benelli Auto/Super Black Eagle/Vinchi/M190, Weaver 93, Stoeger M3000.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.
The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.
EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
Add EGW's Practical or HD Scope Rings to make it a complete overhaul!
EGW machines these in their shop using one of the USA-made Fadal machining centers.
After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Installation:
EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
Videos
View AllClose
Warranty Information
| Machined From | Domestic 6061 T6 Extruded Aluminum |
| Finish | Matte Black |
| Mounting Hardware | #8 T-10 Screws and T-10 Bit Included |
| Type of Mount | Remington 4, 6, 7400, 750, 7600, 7615 Benelli Auto/Super Black Eagle/Vinchi Weaver 93, Stoeger M3000, Stoeger M3500 |
| Center Spread, in | 2.05" |
| Overall Length, in | 5.488" |
| Height, in | .4" |
