ASK AN EXPERTDescription
- Available in Hardcoat black finish
- 7075 Aluminum
- Mounting Hardware is Included
EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with this mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take this mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
- Remove the rear sight
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
Warranty Information
| Coating | Matte Black Hardcoat |
| Material | 7075 Aluminum |
| Overall Length, in | 1.604" |
| Overall Width, in | .99" |
| Mounting Hardware | (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw |
| Red Dot Fitment | Leupold DeltaPoint Pro, JPoint, Shield RMS/RMSc/SMS, Redfield Accelerator, Optima |
| This mount fits (including but not limited to) |
Sig #8 Sights P210A Standard P220 P224 P225 P225-A1 P226 P227 P228 P229 P238 P239 P245 P320 P938 SP2022 M11-A1 MK25 Bersa Thunder UC Series (9/40/45) Bersa Thunder HC Series (9/40/45) FN 509 |
